deep drawer storage solutions

60 views

deep-drawer-storage-solutions deep drawer storage solutions

deep drawer storage solutions – Wooden drawers, over time can create niggling little faults which we invariably put up with, awkward and annoying as they can be – when really – the majority of these problems are relatively simple to fix. Drawers at which the base has split and sticking drawers are probably the most frequent issues experienced. With only a little understanding these can be rectified without having to begin phoning around for a joiner as the initial or our only option.

Overloading drawers can often be the main cause of sticking drawers. The first step would be to fully empty the drawer and eliminate inspection. Check for loose or protruding nails or pins either on the drawer or in and around the drawer framework. Where evident; hammer flush and refit drawer. It could be that straightforward.

Tip. Before getting the toolkit outside for sticking drawers; initial try rubbing on the runners and drawer grooves with candle wax. This might just do the task with no further effort.

Drawer runners could also be the culprit. Assess how easily the draw slides across the wooden runners. Should they’ve worked loose it can be the cause of sticking; again, generally because of overloading. In that case, then just apply fresh glue to the runner and pin into place.

Worn runners are another frequent cause of drawer issues. The uppermost sides can become worn with use and time. Check that the underside of the runner is still good – it might be possible to just eliminate the runner and turn it over. In that case, then carefully prise off it with a wood chisel- apply glue- and re-pin into position.

New runners could be demanded if turning the previous runners round doesn’t solve the problem of sticking. Apply a thin coat of wood glue to the rear of the runner- press into position- and affix with pins.

Drawer bases can also suffer the negative effects of overloading. In time they’ll start to sag, and eventually they can split completely, requiring replacement. In this case, cut on a new base bit from either plywood or from a hardwood of choice. Next, remove the pins or nails securing the damaged base to the body of the drawer utilizing pincers and eliminate any glue blocks that may be attached with a mallet and wood chisel. Replace with new base by gluing and utilizing pins.

From a strength point of view, based on utilization, this may not be the best option.

Originally posted 2017-01-03 20:10:20.

Leave a reply "deep drawer storage solutions"

Author: 
    author