drawers under kitchen cabinets – Wooden drawers, over time can develop niggling little faults which we invariably put up with, inconvenient and annoying as they can be – when really – the majority of those problems are rather simple to repair. Drawers where the base has split and sticking drawers are probably the most common problems experienced. With just a little knowledge these can be rectified without having to start calling around for a joiner as the initial or our sole option.
Overloading drawers can often be the root cause of sticking drawers. The first step is to completely empty the drawer and eliminate review. Check for protruding or loose nails or pins either on the jar or in and around the drawer framework. It might be that simple.
Tip. Before obtaining the toolkit out for sticking drawers; initial try rubbing the runners and drawer grooves with candle wax. This may just do the job without any further work.
Drawer runners could also be the culprit. Check how easily the draw slides along the wooden runners. If they’ve worked loose it can be the reason behind sticking; again, generally due to overloading. If so, then simply apply fresh glue to the runner and then pin back into place.
Worn runners are another common cause of drawer problems. The uppermost sides can get worn with use and time. Check the underside of the runner remains great – it may be possible to simply eliminate the runner and turn it over. If so, then cautiously prise it off using a wood chisel- apply glue- and re-pin into place.
New runners may be demanded if turning the previous runners round doesn’t solve the issue of sticking. Apply a thin coat of wood glue to the rear of the runner- press into place- and affix with hooks.
Drawer bases can also suffer the adverse effects of overloading. In time they’ll begin to sag and eventually they can split entirely, requiring replacement. In this case, cut a fresh base bit from plywood or from a hardwood of choice. Then remove the pins or nails securing the damaged base to the body of the drawer utilizing pincers and eliminate any glue blocks which may be attached using a mallet and wood chisel. Replace with fresh base by gluing and utilizing hooks.
From a strength perspective, depending on usage, this may not be the best option.