small storage chest with drawers – Wooden drawers, over time may develop niggling little faults which we always put up with, inconvenient and bothersome as they may be – when actually – the vast majority of these problems are relatively easy to repair. Drawers where the foundation has broken and sticking drawers are possibly the most common issues experienced. With only a little knowledge these may be rectified without needing to begin phoning around for a joiner as the initial or our only option.
Overloading drawers may often be the root reason for sticking drawers. The very first step is to completely empty the drawer and remove for review. Check for loose or protruding pins or nails either on the drawer or in and about the drawer frame. It could be that straightforward.
Tip. This may just do the job without any further work.
Drawer runners are also the culprit. Assess how easily the draw slides along the wooden runners. Should they have worked loose it may be the reason behind sticking; again, generally because of overloading. In that case, then simply apply new glue to the runner and then pin into place.
The uppermost sides can get worn with time and use. Check the underside of the runner is still good – it may be possible to simply remove the runner and flip it over. In that case, then cautiously prise it off with a wood chisel- apply glue- and re-pin into position.
New runners may be required if turning the previous runners round does not solve the issue of sticking. Apply a thin coat of wood glue to the back of the new runner- press position- and combine with pins.
Drawer bases may also suffer the negative effects of overloading. In time they’ll start to sag, and eventually they can split entirely, requiring replacement. In cases like this, cut on a fresh foundation bit from either plywood or by a hardwood of choice. Next, remove the nails or pins securing the damaged foundation to the entire body of this drawer utilizing pincers and remove any glue blocks that may be attached with a mallet and wood chisel. Replace with fresh foundation by gluing and utilizing pins.
Drawer bases that are broken may be sometimes repaired, that is to say; just get rid of both halves from the drawer body and then paste them back together. From a strength point of view, depending on utilization, this may not be the most suitable choice.